1. What is Electricity?
Electricity is the movement of tiny particles called electrons through a conductor (such as wires). Think of it like water flowing through pipes: when electrons move, they create energy that powers our daily lives.
2. Electric Charge
Everything is made up of atoms, which contain protons, neutrons, and electrons:
Protons → Positively charged (+)
Electrons → Negatively charged (-)
Neutrons → No charge (neutral)
When electrons move from one atom to another, an electric charge is created.
3. Conductors and Insulators
Conductors: Materials that allow electricity to flow easily.
Examples: Copper, aluminum, gold
Insulators: Materials that resist the flow of electricity.
Examples: Rubber, plastic, glass
4. Voltage, Current, and Resistance
Voltage (V): The force that pushes electrons, measured in volts (V).
Analogy: Water pressure in a hose.
Current (I): The flow rate of electrons, measured in amperes (A).
Analogy: The amount of water flowing in a hose.
Resistance (R): Opposition to electron flow, measured in ohms (Ω).
Analogy: A kink in a hose that slows water flow.
5. Power Formula
Power (Watts, W): Measures how fast energy is used.
Formula:
P=V×IP = V \times IP=V×IExample: A 220V bulb using 1A of current:
P=220V×1A=220WP = 220V \times 1A = 220WP=220V×1A=220W
Note: Power (W) is used to compare AC and DC power.
6. Energy (kWh) – Power Over Time
Energy is measured in kilowatt-hours (kWh), which is how electricity bills are calculated.
Example: A 100W bulb running for 10 hours:
100W×10h=1kWh100W \times 10h = 1kWh100W×10h=1kWh
7. Ohm’s Law
Ohm’s Law describes the relationship between voltage (V), current (I), and resistance (R):
V=I×RV = I \times RV=I×R
Triangle Tool: Cover the variable you need:
Voltage (V) = I × R
Current (I) = V ÷ R
Resistance (R) = V ÷ I
Example: A 9V battery connected to a 3Ω resistor:
I=9V÷3Ω=3AI = 9V ÷ 3Ω = 3AI=9V÷3Ω=3A
8. Types of Circuits
Series Circuit:
Components are connected end-to-end, forming a single path for current.
If one component fails, the whole circuit stops working.
Example: Old Christmas lights—if one bulb burns out, all go out.
Parallel Circuit:
Components are connected across common points, creating multiple paths for current.
If one component fails, others still work.
Example: House lamps—if one bulb burns out, the rest stay on.
9. AC vs. DC (Alternating vs. Direct Current)
DC (Direct Current): Electrons flow in one direction.
Example: Batteries, solar panels.
AC (Alternating Current): Electrons switch direction back and forth.
Example: Wall outlets (home electricity).
10. Summary
Electricity is the flow of electrons.
Voltage (V) pushes them.
Current (I) moves them.
Resistance (R) slows them.
Circuits provide paths for them to flow.
